Shenzhen Tongxinke Electronic Technology Co., Ltd.

မြန်မာ

WhatsApp:
+86 17287775445

Select Language
မြန်မာ
နေအိမ်> ထုတ်ကုန်များ> High-Q Capacitor> မြင့်မားသော RF ပါဝါ Ceramic Capacitor> ကြိမ်နှုန်းမြင့်ပါဝါ ceramic dielectric capacitor
ကြိမ်နှုန်းမြင့်ပါဝါ ceramic dielectric capacitor
ကြိမ်နှုန်းမြင့်ပါဝါ ceramic dielectric capacitor
ကြိမ်နှုန်းမြင့်ပါဝါ ceramic dielectric capacitor

ကြိမ်နှုန်းမြင့်ပါဝါ ceramic dielectric capacitor

Get Latest Price
min ။ အမိန့်:1
ကုန်ပစ္စည်း Attrib...

မော်ဒယ်နံပါတ်။DLC70L(130130)

ထုပ်ပိုးခြင်း...

The file is encrypted. Please fill in the following information to continue accessing it

ကုန်ပစ္စည်းအက...
DLC70L သည် စွမ်းအားမြင့် RF Microwave Ceramic Capacitor ဖြစ်သည်။
DLC70LHigh-frequency power ceramic dielectric capacitor
မြင့်မားသော Q အချက်၊ ESR နည်းပါးခြင်းနှင့် ESL၊ ဆူညံသံနည်းပါးခြင်းနှင့် ယုံကြည်စိတ်ချရမှု မြင့်မားခြင်းတို့ ပါဝင်သောကြောင့် ဤထုတ်ကုန်သည် မြင့်မားသော RF လက်ရှိ၊ ဗို့အားနှင့် ပါဝါတို့ကို ခံနိုင်ရည်ရှိသည်။ ၎င်းကို တစ်ပိုင်းလျှပ်ကူးပစ္စည်းထုတ်လုပ်ခြင်း၊ induction အပူပေးခြင်း၊ inductively coupled plasma စနစ်များ၊ သိပ္ပံနည်းကျတူရိယာများ၊ ဆေးဘက်ဆိုင်ရာပစ္စည်းများ၊ စွမ်းအင်မြင့် RF ပါဝါပို့လွှတ်ခြင်းနှင့် ကိုက်ညီသော circuit များတွင် တွင်ကျယ်စွာ အသုံးချပါသည်။

DLC70L Capacitance ဇယား

Capacitance (pF) Code Tolerance Rated Voltage Capacitance (pF) Code Tolerance Rated Voltage Capacitance (pF) Code Tolerance Rated Voltage
200 201 G, J. 10KV Code: 103 1800 182 G, J. 10KV Code: 103 12000 123 J. 3000V Code: 302
220 221 2200 222 15000 153
270 271 2700 272 22000 223
300 301 3300 332 G, J. 5KV Code: 502 33000 333
330 331 4700 472 47000 473
390 391 5100 512 56000 563
470 471 5600 562 68000 683 1000V Code: 102
560 561 6800 682 82000 823
680 681 7500 752 100000 104
820 821 8200 822 120000 124
1000 102 10000 103  
1200 122  
1500 152

အစိတ်အပိုင်းနံပါတ်
C70L

Code G J
Tolerance ±2% ±5%

DLC70L Pin အမျိုးအစားနှင့် အတိုင်းအတာများ
ယူနစ်- လက်မ (မီလီမီတာ)
Termination Code Type / Outline Capacitor Dimensions Lead Dimensions Terminal Electrode & Lead Material
  Length (Lc) Width (Wc) Thickness (Tc) Termination Size (B) Length (LL) Width (WL) Thickness (TL) Copper-plated, tin-plated
P Chip (Non-magnetic) 1.350 ± .050 (34.29 ± 1.27) 1.350 ± .050 (34.29 ± 1.27) .197 (5.00) max .039 ~ .071 (1.00 ~ 1.80)
MN Microstrip (Non-magnetic)   .748 (19.00) min 1.299 ± .020 (33.00 ± 0.50) .012 ± .001 (0.30 ± 0.025) Silver-plated copper strip
AN Axial leaded (Non-magnetic)
FN Radial leaded (Non-magnetic) .669 (17.00) min .157 ± .008 (4.00 ± 0.20) .012 ± .001 (0.30 ± 0.025)

ဆက်သွယ်ရေး စွမ်းရည်
Item Specification
Quality Factor (Q value) - Capacitance ≤ 1000 pF: Q ≥ 2000, test frequency 1 MHz.
 
- Capacitance > 1000 pF: Q ≥ 2000, test frequency 1 kHz.
Insulation Resistance (IR) - ≥ 10⁵ MΩ at 25°C, tested at 500 VDC.
 
- ≥ 10⁴ MΩ at 125°C, tested at 500 VDC.
Rated Voltage (WVDC) See Capacitance Table.
Dielectric Withstanding Voltage (DWV) - 500V < Rated Voltage ≤ 1250V: Apply 150% of rated voltage for 5 seconds.
 
- Rated Voltage > 1250V: Apply 120% of rated voltage for 5 seconds.
Operating Temperature Range -55°C ~ +125°C
 
(Contact Dalicap Technology Co., Ltd. for higher temperature requirements.)
Temperature Coefficient (TC) 0 ± 30 ppm/°C
Capacitance Drift ±0.2% or ±0.05 pF, whichever is greater.
Piezoelectric Effect None
Termination Type See Lead Type and Dimension Table.

ပတ်ဝန်းကျင်စမ်းသပ်မှု
Item Specification Method
Resistance to Soldering Heat Appearance: No mechanical damage.
 
Capacitance change: -1.0% ~ +2.0% or 0.5 pF, whichever is greater.
 
Q value: > 1000.
 
IR: Not less than the initial requirement value.
Preheat at 150°C ~ 180°C for 1 minute, immerse in solder at 260 ± 5°C for 10 ± 1 seconds, cool for 24 ± 2 hours, then test.
Thermal Shock DWV: Meet initial requirements.
 
IR: ≥ 30% of the initial requirement value.
 
Capacitance change: ≤ 0.5% or 0.5 pF, whichever is greater.
Test per MIL-STD-202, Method 107, Condition A.
 
Expose at extreme temperatures for 15 minutes; transition from minimum to maximum operating temperature in ≤ 5 minutes, repeat for 5 cycles.
Moisture Resistance (Same as thermal shock specs) Test per MIL-STD-202, Method 106.
Steady-State Humidity Heat IR: Meet initial requirements.
 
Capacitance change: ≤ 0.3% or 0.3 pF, whichever is greater.
Test per MIL-STD-202, Method 103, Condition A.
 
Apply 1.5 VDC at 85°C, 85% RH for 240 continuous hours.
Life (Endurance) IR: ≥ 30% of the initial requirement value.
 
Capacitance change: ≤ 2.0% or 0.5 pF, whichever is greater.
Test per MIL-STD-202, Method 108 at extreme temperature for 2000 hours:
 
- 500 VDC < Rated Voltage ≤ 1250 VDC: Apply 1.2× rated voltage.
 
- Rated Voltage > 1250 VDC: Apply rated voltage.
Terminal Strength Microstrip: > 20N Test per MIL-STD-202, Method 211.

DLC7OL စွမ်းဆောင်ရည်မျဉ်းကွေး
ESR နှင့် capacitance မျဉ်းကွေး (30 MHz တွင်တိုင်းတာသည်) Resonant ကြိမ်နှုန်းနှင့် capacitance မျဉ်းကွေး
70L1
အဆင့်သတ်မှတ်ထားသော လက်ရှိနှင့် ကြိမ်နှုန်းမျဉ်းကွေး
70L2
နေအိမ်> ထုတ်ကုန်များ> High-Q Capacitor> မြင့်မားသော RF ပါဝါ Ceramic Capacitor> ကြိမ်နှုန်းမြင့်ပါဝါ ceramic dielectric capacitor
စုံစမ်းစစ်ဆေးရေး Send
*
*

ငါတို့သည်သင်တို့ကိုချက်ချင်းဆက်သွယ်ပါလိမ့်မယ်

ပိုမိုမြန်ဆန်စွာဆက်သွယ်နိုင်အောင်ပိုမိုသောအချက်အလက်များကိုဖြည့်ပါ

Privacy ထုတ်ပြန်ချက် - သင်၏ privacy သည်ကျွန်ုပ်တို့အတွက်အလွန်အရေးကြီးသည်။ သင်၏ကုမ္ပဏီ၏ကိုယ်ရေးကိုယ်တာအချက်အလက်များကိုသင်၏ရှင်းလင်းပြတ်သားသောခွင့်ပြုချက်များနှင့်အတူမည်သည့်ထုတ်ဖော်ပြောဆိုမှုကိုမထုတ်ဖော်ရန်ကတိပေးသည်။

ပေးပို့